Key points of crude oil flowmeter selection

For different measuring medium (acid, alkali, organic liquid, oil, food, etc.), the flowmeter can choose different materials (cast steel, stainless steel and 316) manufacturing, suitable for chemical industry, petroleum, medicine, electric power, metallurgy and food and other industrial sectors of the flow measurement work.The flowmeter with transmission function can be matched with ls-lc series flow integrator and other instruments of our company, which is convenient for centralized detection, output standard signal, automatic control and data processing, and can be directly connected to the computer network.

Features of crude oil flowmeter:

1. High measurement accuracy: grade 0.2 and 0.5;

2. Simple, solid and reliable mechanism;

3. Especially suitable for measuring medium with high viscosity, and insensitive to the change of the viscosity of the measured liquid;

4. Easy installation.The front and back of the flowmeter do not need a straight section, even if the flowmeter is near the valve, bend, shrink, expand, also do not need to install a straight section.

5, ls-lc-a cast iron elliptical gear flowmeter, widely used in all kinds of oil and cast iron non - corrosive liquid medium measurement

Ls-lc-b type cast steel elliptical gear flowmeter, used for measuring high pressure and low corrosive medium

Ls-lc-c elliptic gear flowmeter is widely used for the measurement of highly corrosive liquid medium, such as acid, alkali, salt and organic compound

8. In order to prevent the gear of the flowmeter from getting stuck with impurities, a filter must be installed upstream of the flowmeter

9. Explosion protection grade: ExiaIICT6