Circulating water optical DO sensor
Email: sales01@cxflowmeter.com
whatsapp: 008618049841995
Today, a customer wanted to consult about purchasing circulating water Optical DO sensor. He provided the following information:
Seawater for recirculating aquaculture system (RAS), temperature range (+5°C to +35°C)
Optical DO sensor
Housing material: 316L/Titanium Alloy
Range: 0-50 mg/L, 0ppm~saturation
Working Temperature: 0-55℃
Accuracy: ±0.1mg/l; ±0.1℃
Data Output: Support RS-485, MODBUS protocol
Power Input: 12-36V, current 50mA
Cable – 30 meters
After receiving the consultation, our technicians recommended a suitable sensor for him
Measuring range
Dissolved oxygen: 0-20mg/L
Saturation: 0-200%
resolution
Refer to the technical data sheet for connecting the sensor
Comprehensive accuracy
Refer to the basic information on connecting sensors
|Output type
4~20mA (the corresponding range can be set)
Current accuracy
±0.2%FS
|Output load
< 5000
Functional relay
1 (can be set to clean, alarm or follow)
Switching relay
2 SPST relays
load capacity
5A 250VAC/5A 30VDC
|Transmission interface
RS485
communication protocol
MODBUS-RTU
Working power supply
100~240VAC or 9~36VDC
working temperature
0~60°C
Working humidity
Relative humidity ≤90%
Installation method
Dial installation
Overall dimensions
(H×W×D) 108*108*139mm
Opening size
92.5*92.5mm(positive tolerance)
If you also have specific needs for
industrial sensors, please contact CIXIFM winny:
Email: sales01@cxflowmeter.com
whatsapp: 008618049841995
