Clamp on liquid flow meter purchase selection factors

sales01@cxflowmeter.com


Clamp on liquid flow meter ultrasonic pipe flow meter purchase selection factors

 

 

The clamp-type ultrasonic flowmeter is a widely used ultrasonic flowmeter. The installation of the transducer does not require pipeline interruption, and it can be used immediately. It fully embodies the characteristics
of the ultrasonic flowmeter that is simple to install and easy to use.

 

Clamp-type ultrasonic flow can complete fixed and mobile measurements. Use special coupling agent (room temperature curing silicone rubber or high temperature long chain polymerized grease) to install without
damaging the pipeline during installation.

 

Before installing an ultrasonic flow meter, you should understand the site conditions, including:

 

1. What is the distance between the sensor installation place and the host machine;

 

2. Pipe material, pipe wall thickness and pipe diameter;

 

3． Pipeline age;

 

4． Fluid type, whether it contains impurities, bubbles, and whether the tube is full;

 

5. fluid temperature;

 

6. Whether there are interference sources at the installation site (such as frequency conversion, strong magnetic field, etc.);

 

7． The temperature of the four seasons where the host is placed;

 

8. Whether the power supply voltage used is stable;

 

9. Whether remote transmission signals are needed and their types;

 

According to the on-site conditions provided above, CIXIFM can be configured according to the on-site conditions, and special models can also be made if necessary.

 

If you are currently searching for a suitable ultrasonic clamp on flow meter and don’t know how to choose,

please contact CIXIFM winny: sales01@cxflowmeter.com