CX-PT-3351 remote flange type differential pressure transmitter

    Brife Introduction:

    Remote differential/level transmitter is used for prevent the medium in the pipe direct into the transmitter. The capillary (filled with fluid) is connected between pressure sensing diaphragm and transmitter. It is used for measuring liquid, gas or steam’s level/flow or pressure, then change it as 4-20mA signal output.

    CX-PT-3351 remote differential pressure transmitter can use together with Hart handhold device.

    CX-PT-3351 remote flange type differential pressure/level transmitter can used as the following condition:

    1.tested medium is corrosive ;

    2.need to isolate high temperature tested medium and transmitter;

    3.tested medium has solid seston or high viscosity medium;

    4.tested medium leads by lead pressure pipe and easily solidify or crystallize;

    5.replace medium need to clean test convertor carefully;

    6.test convertor need to keep hygiene. Use for: corrosive or viscosity liquid.

    Attn:

    1.filled 200 series silicone oil, operating temperature -40-+149C; filled high-temp proof silicone oil, operating temperature -20～+315C.

    2.for corrosive medium，choose isolation diaphragm material..